Skip to content

,

The Difference Between Floor Buffers and Floor Burnishers

The Difference Between Floor Buffers and Floor Burnishers

Maintaining attractive and glossy floor surfaces necessitates more than just sweeping and mopping. Hard floor surfaces may appear clean to the naked eye, but dirt and grime that is not visible to us will accumulate over time, so it is critical that you give your hard floors a deeper surface clean. Floor buffing and floor burnishing are two different types of surface cleaning methods that were developed to effectively clean, disinfect, and restore hard floor surfaces that are subjected to constant wear and tear. Hard floors can include marble, tile, laminate, hardwood, concrete, and other types of hard flooring surfaces.

Floor burnishers and floor buffers are versatile pieces of janitorial equipment that are simple to maintain. They are used for commercial and residential floor restoration, surface cleaning, and other janitorial tasks. Despite the fact that floor burnishers and floor buffers serve the same purpose for hard floors, they are two completely different electrical units that function differently to produce glossy finishes to varying degrees. It is best to understand how each machine works before purchasing a piece of equipment, such as a floor buffer or floor burnisher.

What are floor burnishers?

High-speed floor burnishing is a process that involves controlled scratching on a hard surface, removing and smoothing the floor’s top layer and increasing the surface gloss. Floor burnishers are lightweight, high-speed polishing machines that spin at speeds ranging from 1000 to 3000 RPM. Floor burnishing machines are primarily used to polish and restore the lustre of your hard floors’ surfaces.

Floor burnishers extend the life of hard surfaces by combining your preferred floor cleaning solution with a single-disc floor pad that easily attaches and detaches from the machine’s bottom. Because burnishing machines are specifically designed to have more power, this floor burnishing pad generates faster rotations on the surface, resulting in more friction on the hard surfaces, ultimately removing any residue and yielding a spectacular shine.

What are floor buffers?

Floor buffing is a process that deep cleans the surface of your hard floors with a designated floor cleaning solution. Floor buffers exfoliate the top layer of your floors, removing dirty surface residue and restoring the original glossy appearance. Floor buffers are low-speed rotary machines that spin at speeds ranging from 150 to 330 RPM and are used in a side-to-side motion, which is why they are also known as swing machines.

Floor buffers are multi-purpose floor restoration units used primarily for surface scrubbing, polishing, cleaning, and stripping hard floors. Floor buffers are simple to use and were specifically designed to remove scuffs, eliminate previous finishes from the floor, level the surface, and restore and enhance the original shine of the floor.

So, what is the difference between them?

The primary distinctions between floor buffers and floor burnishers are their speeds, the motion with which they are operated, and the specific tasks that they can perform. When compared to floor buffers, floor burnishers use a mechanical process involving high-speed disc rotations to produce a much higher gloss finish in a shorter amount of time. When handling a burnisher, use caution because multiple coats of a floor cleaning solution may be required to keep the shine for longer periods of time while preventing the floor from becoming worn. Floor buffers’ ability to handle more modern finishes, such as high-speed burnished floors, may also be limited.

Floor burnishers and floor buffers can appear very similar, but floor burnishers are typically much heavier units than floor buffers. This extra weight is due to the complex engine design built into a burnishing machine, which allows it to generate more power at much higher speeds. When compared to a floor buffing machine, the additional pressure from the weight of a floor burnisher provides a significant advantage in producing a remarkable shine. Floor buffers will also restore the gloss levels of your hard floors; however, unlike a floor burnisher, which produces a glossy, “wet-look” surface finish, they produce a more refined and subtle surface gloss finish. Furthermore, when using a floor buffer, the machine moves side to side, whereas floor burnishers move back and forth in a straight line.

Conclusion

The advantages of commercial and residential surface restoration and floor maintenance procedures extend far beyond achieving a dazzling finish. There are numerous advantages to owning machinery such as a floor burnished or floor buffer. In today’s unpredictable and demanding world, maintaining your hard floor surfaces is critical, so it’s recommended that you modernise your standard method of routine surface cleaning and maintenance. Surface gloss and applied floor finishes will deteriorate much faster based on the amount of foot traffic they receive on a daily basis, so keep in mind that preventative floor care is far less expensive than restorative floor care.

A floor burnisher or floor buffer, for example, is a dependable tool for simplifying laborious manual cleaning methods. It is as simple as pulling out your broom, mop, or vacuum to use these machines! After you’ve cleaned and restored your hard floor surface, it’s much easier to maintain and much more convenient to keep it that way. Ultimately, you can make a good first impression while also complying with health and safety regulations. Floor maintenance machines are designed specifically for people like you to avoid strenuous physical labour while also saving you time and, most importantly, money.

Share:

Related posts

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x

Home

Shop

Training

More